Posted by: Richard @AHarris do you use those? I gather Chinese made.<br/>I'm tempted to buy a target with optical plummet to try but as cheap as...
Posted by: A Harris Turn 'er over. Most prism holders are 0mm offset on one side and -30mm offset on the other side. ?ÿ For some reason Topcon ones ca...
Posted by: GMPLS I'm not here as often as I was before the upgrade because there just isn't as much to read. I come here and view the list of unread p...
Well that's a fairly important piece of information that was left out!! Just out of curiosity why pay so much for Civil 3D to use a completely differe...
Posted by: leegreen Most of the problems Gregg and others have are actually centered around the Topcon dealer. They just don't know how to address the...
No need to back save each time just set it once on the machines with Autocad 2018 and you should never have to do anything again. Really shouldn't be ...
If you set the save format to autocad 2013 file format (the format used for 2013-2017) under options in 2018 there should be no problem.
Have a look at this thread towards the end. There may be some issues with this robot..
Gregg, What specific issues have you had with the Topcon GT, has it all been related to the new motors? I wouldn't want to buy one of these if there a...
Carlson licenses don't expire.
This is probably already well known, but the word benchmark would have come from a metal piece being put in the crow's foot I posted above which provi...
This side of the pond a crows foot would be a benchmark.
Posted by: Totalsurv I like the forum summary page if the lists went back longer it would be very good. Looks like this has been done since I posted. ...
I would say alot of work is being done in the background and this is not the finished article. I built my own website before that took quite a long ti...
In Magnet- Go to home screen>Edit>Points, then add your points. To stakeout points- Home>Stake>Points, then stake your points This is fair...
beuckie, post: 456113, member: 2245 wrote: I would stay away from the Blk360. On the laserscanning forum there are a lot of problems posted. To me it ...
If it was here you would be looking at a ring fort for the circle.
I believe you can stop Windows 10 updates by setting your internet connection to metered. I have not tested it myself just heard it somewhere.
