It looks like the boards you have are older versions. I downloaded firmware from here
You need to check what the board in the receivers are. Alot of the Hiper models use the board HGGDT. My Hiper+ is marked end of life but it has the HG...
You need to check what the board in the receivers are. Alot of the Hiper models use the board HGGDT. My Hiper+ is marked end of life but it has the HG...
I hope this is the case. My Hiper+ and Legacy E+ don't have memory so I am unable to upload the firmware, still trying to find a work around. Is it po...
I sent a One Drive link with the Topcon Tools file to the email in your profile
I agree. I don't use drones and have limited exposure to them but I felt the article was spreading misinformation for commercial reasons.
Digtal Globe provides satellite imagery up to 31cm resolution but at a cost. The European Sentinel program has free remotely sensed data and processin...
If that works for you, well...it's hard to argue with success.?ÿ For me, the idea of copying model space elements that represent real-world features a...
I am not sure why you don't understand what ctb files are for given they are explained fairly well by the posters above. I would ask the question are ...
I always send a pdf copy these days. It saves them having to look for a ctb file and allows me to show how it should be printed.
I use a ctb file because it allows me to use many different colours in the Cad drawing to aid in drafting and then plot in black and white using the c...
My S6 will fit standard Topcon tribrach but wont sit properly in the Topcon tribrachs with optical plummet.
Yes but the misclosure has been the starting point for him to know he has a problem. I also question whether there is enough redundancy, the OP has no...
It would interest me in this case considering the nature of the traverse conditions and the probable limits on redundancy.
I read it fine and I also read that a 0.5 second gun was used. If a 0.5 second gun was used on this traverse I suspect it may have been used to attain...
