Exactly, the geo-referenced photos can be imported into GIS software. We're in the process of taking all the property evidence and control we have fou...
Pix4D give you a huge amount of control over the processing and the output data. You can get monthly licenses while you're getting started so you don'...
We use WorkflowMax (www.workflowmax.com) for our project accounting, invoicing, and time tracking. It's a little bit of a beast to set up but it's rea...
As a follow up since this made the Facebook page...we've compared the 1m and 2m LiDAR data to a few other projects we did in the past. In general it's...
Now put the point cloud under this in C3D and you can draft with real elevations as well!
Ladd Nelson, post: 401775, member: 307 wrote: The Supported Hardware tab on the SurvCE product page currently indicates: TS16 is not supported by ver...
Now with pictures here: I was originally asking around 30k for both. Make an offer if interested.
Unless you need to carry a specific payload or need to cover a really large area (VLoS starts to get in the way of that though) a smaller and cheaper ...
If the state paid for and took 200 feet wide of ROW then they have fee title to 200 feet wide or ROW, nothing more, nothing less. You can't (at least ...
I believe that the rationale is that they survey the existing right of way lines, develop plans, then agree on an appropriation with that land owner. ...
It is taught by the highway lawyers in NYS, in continuing education classes, and upheld and advised by NYS DOT regional surveyors. The monuments were ...
It is taught by the highway lawyers in NYS, in continuing education classes, and upheld and advised by NYS DOT regional surveyors. The monuments were ...
If surveying in NYS do not hold DOT ROW monuments. Up until recently they were not set by Surveyors and can be many feet off (hey look there's a rock ...
Rich., post: 393246, member: 10450 wrote: I hear you. I'm in lower Westchester County. Mamaroneck to be exact. Same situation.I'm in Beacon (Sout...
Some of our boundary clients want SPC coordinates shown on the mapping. It seems to me that working in SPC and labeling in surface distances is best f...
