These threads from the Autodesk discussion groups will also be useful for you.

CarlCarl, if you prefer to use the Primo driver then you should be able to add the C size sheet directly through Windows.Locate the printer in the Dev...

Apparently some of the deed stakers and pincushion artists around here have determined that because I use CAD software as a tool to do my job I am som...

The textbook I recommend for most people is Mastering Civil3D available from Amazon, and several other bookseller websites.You need to make contact wi...

My first guess was a Trabant - but that seems unlikely.It looks like it might be British.

I would program a squad of them to follow hardhats around while simultaneously swatting mosquitoes with their rotor blades.

Might Be An Anti Carlson MoveWhen I heard about this I started thinking about what has happened to TDS after they were acquired by Trimble. The funct...

Not so cute video - but worth watching anyway

> Continued from earlier post.> Would a points file or dwg work better for getting the conversion completed?> > Northern part of Virginia&...

Don't clean them.Part of the value is in the patina, and the marks left by the hands that have used the gear.

Search this forum for "Boustrophedonically". You should find a solution there.There must be a lot of airports that need grid layout - this question s...

There will likely be a seat between the two beams - either neoprene or a sacrificial plate made of softer metal with grease.This design technique is n...

I wouldn't claim to be an expert but I have used LandXML cross section data exported from Caice for layout. I've also built the sections by hand in N...

There are drivers available for these older HP plotters. Usually what you have to do is substitute the XP 64 bit drivers, but they should work for yo...

Be careful Angel - there are a lot of people around here who search through public records for a living. 😉

Do you have an example of one of these? Are the ROW spirals geometrically "true" or are they approximated, similar to the way that Civil3D handles of...