Trimble Integrated surveying uses a resection from RTK points to fix the "conventional" instrument position. This can then be used straight away for s...
Needed this the other day to calc Z offsets from a reference line on ENZ data provided by another engineer.Have updated and improved the sheet to do t...
Thanks for the info about the lime.The trimble active targets are great for construction site use. On the railway everyone is covered in reflective ma...
Ah i see you were looking at the old M3 which is indeed similar to a NPL-332.If it's the same as the NPL-332 then you can transfer files up and down u...
Thanks Lee - that makes sense!
It is pretty much the same as a Nikon Nivo C or a Spectra Precision Focus 8. Not much in common with a NPL-332.2 differences to the nivo (there are pr...
Thanks I have looked for this before and never found it.I wonder why it isn't in the normal cogo menu.I have never used the calculator as I don't like...
Let us know how the DIY goes.I have a DIY one - in bits...Will get round to it soon.I did ask before, but can anyone tell me the diameter of the steel...
What's the white powder you used to set out the footing lines?I saw this done once in Aus, is it lime? Sticks much better on dusty soil than paint in ...
You can download my previous effort here it may be a bit over the top but the formulas work.A lot of the cols are hidden.
use inverse tangent (arctan) of the difference in azimuth and with the distance AC as the hypoteneuse.If you rig it right the "opposite" is the offset...
have you tried that at 30' ?I am wondering if it sees the prisms all together at that distance.I think at 30' it will see them individually and flick ...
Does it update after each measurement?eg in tracking mode a constantly updating display.As far as I could tell the foresight/sightshot function requir...
Did a couple of years on Survey pro but not a big fan to be honest. I would be more likely to want to see a coordinate without any further complicatio...
It looks like this on the nivo anyway.you can get the quick shot screen from the favourites "star" menu [7] usually or I think it appears by default i...
one difference is that the nivo doesn't have a number keypad.
what method do you use in flex office for importing the data?
are the angles reading correctly on the screen when you are surveying, and then they are wrong later on? or are they showing wrongly on the screen?
have to use dropbox or similar then. I think the raw file will reveal what is going on, when compared to the DXF. I am wondering if the problem lies ...