Turns out I did upload at least the outer tower to Shapeways and condensed it into a blob. it is not as expensive as I thought, but, still not wh...

@chris-mills Chris, I think maybe you missed the point of what i am trying to do.  I don't actually want one, it is more of a "can I do it?" thi...

Three sections done for the outer tower.?ÿ Way too many support nibs and I will have to change the support.?ÿ I broke the actual ribs I wanted to keep...

@paul-in-pa If someone were dead set on making a tower out of metal, the printed version would be very helpful.  It would give you a dimensional...

@paul-in-pa I keep trying to be as authentic as possible, but, you are correct, tying the towers together would help a lot.?ÿ It would also be hard to...

Since Mr Leu's link is broken, this is page 9 from the pdf from my hard drive

Chris, I agree, I am pretty much at the limit.?ÿ At one point I had taken to the idea of printing as sides in FDM, but, you know what I found??ÿ The s...

OK, brain not connected.?ÿ No legs, ... inner tower.?ÿ The test run is complete and 1mm x 1mm printed fine.?ÿ Now to try 0.7mm square

To dramatize what I mean about the instrument sizing, this is the correct scale instrument and legs placed within the 1mm framed tower.?ÿ The instrume...

I need a monitor upgrade as mine are not 4k and my new comp has a an RTX 2080 ti in it.?ÿ The two 32" ones I currently have seem fine, but, I imagine ...

@jflamm Yes, the cables were a complete pain, but, a necessary step in robotic evolution

@warrenward Try a different cable or switch around to see if issues move.?ÿ The cable ends are extremely small wires, oxidize easily and are very hard...

For my 2?› it sounds like a connection issue.?ÿ Intermittent power would cause a shut down, but, a loose Tx or Rx might manifest in the way you are se...

I found some answers from this video and it isn't good.  Tesla Model X towing  They found towing with a Model X that it consumed 3.37 times ...

I am also not a truck person, but, I would consider a Rivian (just better looking IMHO), but, the towing question remains large.?ÿ How does towing aff...

@jaccen I never placed them on Shapeways because of cost.  The few I printed were before they changed their pricing to increase large volume pri...

@jaccen They have been replaced, I found a copy on one of my home NAS's

Just replacing the pictures from the imgtree.net that seems to be gone now:

@bill93 I took one apart and posted it hereAbout as simple a re-cell as you could want, just use very high quality small wire as there is no extra sp...