Yes, you understand correctly and that power source should be fine. The nominal car voltage that you should see from a car cigarette lighter is 13.2 ...

Bluetooth is spread spectrum 2.4GHz, so, by design it should just change to a frequency without interference. Unless all frequencies are being compro...

If you are still using NiCD or NiMh batteries, I would suggest a better charger anyway. Ok, I would really suggest changing to LiPo, but, the super c...

I need to update the instrument battery portion of this thread. I am using 3 LiPo batteries that have a current limit of 12.6 volts and low of 10 vol...

I tried printing a 1/20.5 scale scanner for a no cost ad for a project I am printing. It came out very cool and cheap! The first pic is with some 1/4...

The raw in most cases is an ASCII file, but, make sure at least one version is ASCII and readable in wordpad. As time goes by the binary formats will...

Just too correct my last post, I was able to get almost full function out of Survey Controller on a TSC2. An electrical spike subsequently took out a...

Yes, it is a poor design where the negative can still contact while the positive gets further and further away and has to arc.

The cigarette lighter on that charger is what caused a fire in my office back in 1997. It can back out and force an arcing situation that can lead to...

What year did you go to?

It wouldn't be that hard to 3D print,

Doug, it is all yours if you want it.

Eternal gratefulness has been granted...

You guys are off your game today if no one is making fun of my target through a scanner avatar:-D

Very cool, thanks for posting. I grew up in Anchorage and your first picture was just like yesterday

Nobody? Eternal gratefulness is up for grabs

I have been thinking about it, just so busy though

Jim, the biggest reason I have found for the thin film of dielectric grease is that everything, and I mean everything, likes to be attached to it. Wh...

It must have been very intense with all of the effort placed into banning conversation. Now if the same effort was placed into Facebook ...