I actually find it fairly stable for the most part (compared to the early years), but, when it starts chunking your session is about to be done though

If you end up with a MiFi, make sure it has the capability of external antennas for those shady areas. i printed a box for mine The black "X" works ...

Mark O, post: 390414, member: 11591 wrote: Update:Robotics working. My issues and how I overcame them:1. The cheap ebay 4 pin Hirose was not for Trimb...

It could be worse, you could accidentally select "delete outside of fence" since it is conveniently right next to what you want. At least that way yo...

The problem with levels is they don't get better with time, they get worse. Most manufacturers use mylar wire to hang the compensator and time combin...

I was actually referring too Clark on Surveying and Boundaries by Robillard and others, but, I spelled it wrong.

I opened this thinking that someone had 3D printed some cool logo's to stick on their instrument, saddened to hear it is just a manufacturer using our...

You can power the unit through the serial pins. Serial pins 5 and 9 can power the unit and it has a regulator, so, it can be 5 to 12 volts. From exp...

Sounds like a bad ground. Both the Tx and Rx need a ground or they will gain then lose connection. I left a cartoon of which pin is which in this th...

Connection issues are usually cable as I am sure you already know. You might also have to change the Hirose port as well. Do a conductivity test thr...

Good work and write up. You need to have a beer and bask in your greatness now.

and that's what it is all about. The manufacturers want to make stuff, not support it. They don't go out of their way to make it painful, but, why n...

1-19 are very much separate from the higher numbered programs. You do not go through program 20 to start into UDS's, they have to stand alone for col...