Can you run it through the corps con and insert a excel speed sheet. I don't know what you are trying to accomplish but i am assuming you have only 1 ...
I am not sure about how this will work but have you tried editing the base coordinate. If the collector has software( Survey pro does this) that treat...
How large of an area was surveyed
The marksman I was thinking like sure shot. I have seen it before and just could not remember. Thanks
What data collection software do you use/prefer.
What are you monitoring settlement of? That may change the procedures.
We measured the beds of the trucks then in cad built the boxes we wanted all to fit under a rolling tonneau I would reccomend retract tonneau. Then fo...
If it is a smartphone the easiest way is to turn on the wifi hotspot and use that.
Don't quote me on this but it should be free to go from 5.6.2 to 5.6.4 as it is a maintainance upgrade but that may not be the case anymore
5.6.4 allows .dc files to be referenced in or imported
There should be a option to set the tilt that is what you diagramed as collimination.
Is there also a menu option to set the tilt or level compensation and to see level electronicly?
The collimination should be the amount adjusted in the instrument so that the difference between face 1 and face 2 are compensated in only face 1 read...
Is the .015 to .05 your seeing vs plan control or your own VRS shots. if that is all you are seeing keep leveling. .05' differences in a VRS system vs...
I think you have to take a more overall approach check into what vertical control you can as run the loop, then check your matches. No matter how good...
We have a sokkia sld30 and it is a good instrument the wave and read function is pretty nice and you get some really nice closures. If I had to do it ...
In microstation you could use a view for each sheet and rotate view or create match lines and reference file for each sheet then clip and turn on only...
I will look for those but this is a design surface and the extra contours are inside the triangles.
