In the market I work in, I've never dealt with an attorney at a title insurance company. We rarely do ALTA/NSPS surveys so I can't say that the title ...
Bruce Small, post: 394697, member: 1201 wrote: This is a proper request from the title company, and I would comply. They are the experts on title matt...
When the architects took the AIA Cad Standard and rebranded it the "National CAD Standard" there was a lot of push by those that don't work with CAD m...
Assuming that you are in PA - too bad there isn't a Right of Entry/Surveyor's Trespass Statute like there are in 27+ States.The 2006 NSPS ROE Committe...
Here's my understanding for a few states (don't base your ceu/pdu class selection on this list - feel free to correct any errors)In WAFirst Aid Course...
In what ways does the CFedS endorsement work for a Land Survey Business or the established Surveyor?- I like to believe that it's another bit of evid...
JaRo has the organic solution. If you are not that concerned about burning fossil fuels you can have your robot take shots every few seconds as you dr...
Where I practice, it would be most appropriate to file a complaint through the Board of Registration.Regardless of who you file your complaint with: ...
It depends... Kent's comment on the value of the land and survey methods are two good factors. The size of the parcel is another factor. But in every ...
Apparently you folks missed the benefits... they provide "Company-paid license renewals, Surveyor stamps/seals, continuing education fees." Oh yeah.....
LRDay, post: 382901, member: 571 wrote: Anyone here really ready to reject that fence location going back to 1929? I accept that there is an old fen...
May I ask you what is compelling you to undertake this survey? I can't imagine that this could be profitable or fun. It will take a lot of time, you p...
Just don't do it! Don't perpetuate the image of the surveyor by the side of the road... Find another way... Tell a different story... Show a drone... ...
Stephen Ward, post: 376969, member: 1206 wrote: Watermark the stamp over the drawing so that it's impossible to remove the stamp without erasing part ...
Ron Lang, post: 374186, member: 6445 wrote: After thinking about this for a while. I don't know about you guys but most of the plans I get now days a...
You are doing the engineer, the project owner, and yourself a huge disservice when you use the CAD drawings for stakeout.-1. The engineer loses when y...
Leica 1200 TPS did a similar thing about 10 years ago (the points were stacked on some odd reflective surface). I asked Shannon Hixxon if they could a...
Boy o boy. This is a great topic. Lots of good advice. What I want to know is: Does your localization software fit the geoid to the control?orDoes the...
