Regarding the location of the data port, if you think about it, with the port in the body of the instrument, they can connect it to the output from th...

Loyal,No intent to self-promote on Beerleg but I think we have what you are looking for.You can see it here: Topcon Universal Charger w/ 12 Volt plug ...

For the dim recesses of my mind regarding Ashtech and its heirs and assigns:Most of my customers considered the kinematic initalization bar as more of...

Relax Jules. You have exactly what the gentleman is looking for.Kinematic and Stop & Go are different terms used more or less interchangeably tho...

Jimmy,Send me the code the registration status screen generates for your install and let me see if I can get you working.

Amen or ditto to the two comments above.The base in such a setup is always either working off the autonomous position it gets from the satellite data ...

ebay ListingJules, I think I have a couple of those cables in you're interested. I probably soldered up that D-cell tray you have in the picture.

Leather welding gloves?

The clicking sound is a normal state for the EDM in that series and all GPT conventional model total stations. Changing the EDM wait state time to a ...

If you just purchased the software, the serial number you were furnished is for Carlson 2014. They would not sell or furnish a serial number for the ...

Where are you located? I couldn't find the CORS station by the site ID you posted.I would be happy to look at your data. I am not an expert but some...

Makes sense in that light.

Perhaps it's a strange question but I find myself wondering why you'd buy a Nivo C with on-board Survey Pro software if you planned to use a different...

All the bearings and distances are on the plat. The lot appears to include the area within the road right-of-way.

To add a bit to the good information that Kent has offered, I believe that you need at least 5 epochs to process a solution in post processed kinemati...

Perhaps you have solved this issue by now and have moved on. If so, that'd be reason aplenty not to check back here for solutions.That said, if the c...

Are you connecting with the standard 9-pin data collector cable?If so, many manufacturers used that Hirose connector but only Topcon/Sokkia used the s...