I remember one boundary, both the neighbor and my client were upset with me. I laughed and said " Well, If your both mad at me I must be right." They ...

Check this post for info. I have used the ATX360 and found no issues with accuracy and do really enjoyed the ability of the instrument to tracome the ...

SEE:

Isn't the DIN Spec per pointing, so a foresight and back-sight constitute 2 error sources? So that would make the 2 x DIN / Sqrt. of pointings make se...

Call a meeting. Take the plan with you and place it on the table, now spin it upside down. There ya go !!!

Definitely need to look at TraversePC. !!!!!!!!!!

Remember the code doesn't talk about control , it references "between any 2 corners being tested". We OPUS two points all the time. Hold one fixed the...

Yep, It really allows for different methodologies to get to the .07' + 50ppm, and keeps from legislating " turn this many angles for this type of sur...

Maryland: G. Accuracy Standards. (1) The maximum allowable relative positional precision for boundary surveys shall be 0.07 feet (or 2 centimeters) pl...

James Fleming, post: 417649, member: 136 wrote: You can take Gary's word for it...would a surveyor who looks like Tom Selleck lead you astray? ;)Than...

FL/GA PLS., post: 417647, member: 379 wrote: I was wondering the same thing, including all .dwg files from R14 to now, and does it retain all the corr...

Go get a license.

I have been a TPC user since 2007 and really can't say enough about it.The software is surveyor specific which is very nice as your not trying to figu...

I was in the same boat 8 almost 10 years ago with Carlson. I ended up moving to TraversePC. It takes a georeferenced file with a simple insert picture...

We use QuickBooks for our accounting( proposal, invoice, time tracking, etc.) When we create a Customer:Job we have the option of creating user defina...

Andy Nold, post: 388934, member: 7 wrote: I'm not sure whether to scold the crew for wasting paint on their pet bunny or attaboy 'em for not wasting t...

Two steel pins and caps set by the same surveyor. The taller pin is actually leaning over the lower pin. so the center of the cap is basically the sam...

Two steel pins and caps from the same surveyor. the taller pin is actually leaning over the lower pin.

Not my survey but a previous employer tells of a new party chief sent out to measure the volume of a pond. After a full days work, he proved that the ...

TBC works well processing short baselines. I take data from iGage OPUS_90 and process baselines without issue. as far ans using L2 for ionospheric and...