Yes, that one on the trailer, it seems the tower might cause a little bit of multipath. Thats whats nice about a regular pole, pretty thin. I'm no...

I've had that happen, and restrarting Autocad or rebooting your computer has always fixed it for me.

We had one, he would always say, "you don't need your coat or your boots, its not muddy and were just going to be out for a minute". Of course 2 hour...

I'm sorry, its pretty basic math, not a CAD thing at all. On the other hand, if the "sale guy" is so sure how easy it is, he should do the math for y...

My daughter goes to school at SIU in Carbondale. Of course move in days at the dorm are just a day or two before the eclipse. We are going to try an...

When there was suppose to be a leap second, a little over a month ago, we updated our firmware. We are using Hipir II's. We were unable to use them ...

Unless you have a pole with a very fine bubble in it, it seems hard to get good closure. Tribrachs on a tripod give better results. Is the rodman us...

It seems to me they mean Public Land System lines. Maybe kind of a general term for section and quarter section lines.

A couple of questions, are your backsights and foresights using a tribrach and tripod? Any chance you have a prisim with a bad offset in the mix? Yo...

Williwaw, post: 441195, member: 7066 wrote: Cream floats to the top and dregs to the bottom where the low baller thrives on an indifferent public fix...

As far as I know, no easy way. You can drag them away from the line and it will put in a leader line for you if that helps. Its not a big deal to ma...

Just saw this, don't know if you resolved your issue or not. You could try a hard reset and then try loading it. It almost sounds like it thinks you...

12,000 FEET! I suck wind at anything above 5000 feet, 10,000 feet I start to get head aches, 12.000 feet, I'd probably need oxyegen.

Thats why I asked whats if for. If its a four sided boundary survey, no big deal, if its a 100 lot subdivision, its a big deal to go back and look at...

I guess a question I have is, what kind of drawing are they changing? Is it suvey plats, subdivision plats, row plats, engineering drawings, all of t...

I don't know if anyone has suggested this, but maybe its time you switched to C3D, then you will be using the same stuff they are.

I'm not sure what to do other than reload the software.

What I've learned to do is just work around the C3D thing. I've broken lines and had the bearing and distance move to a place I didn't want it. You ...

One thing you can do is lock the points in Civil 3D. Otherwise they can be moved like any other item. Luckily we have people that understand, mainly...