File part 2DBDN S1 1 35-58-31.46 DN S1 2 36-12-41.18 DN S1 3 36-26-57.34 DN S1 4 ...
I hope I got this right - File part 1# Input Field File Survey.Units METERS.Units DMS.Order AtFromTo.Separator .Delta Off.2D.SCALE 1.000000000000# Jo...
Expain Your Targets To Conrad> > If there is any guess work involved, my guess right now is that the results will tend to indicate a smaller sta...
What Do You Use For Precise TargetsPaul,I'm using laser printed targets on an adhesive A4 just wide enough to 'pinch' with the double hairs.
> > I've never tested the centering errors associated with releasing an instrument and replacing it in the tribrach with a different set of lugs...
Expain Your Targets To Conrad> I doubt he is using what you use.> > Paul in PAHello Paul,And this to me was half the fun of the exercise. I d...
> You need to look at the positional tolerances needed for your test. What is the expected pointing accuracy of the instrument? What working dist...
> > I'm not quite understanding the procedure you've described. Could you elaborate a bit, particularly as to how circle was rotated without alt...
> > I am wondering what is the best way to set control with the RTK if at all. I have seen few posts about shooting points multiple times throug...
> For instance if I just wanted to do a quick trig level. It seems the only way to get the gun to spit out data is to go into a job and then you al...
If it's like the 1200 series then there is no need to remove the card; just open the card door, start "SURVEY", then close the door. Leave the card in...
Hello rfc,I'm curious. How will reading 2-faces correct a centering error? Perhaps we have a different understanding of centering error?!?I was only r...
Hello rfc,If you are enthusiastic enough, don't take anyone's word for it, try it out yourself. Calibrate the instrument properly. Read a bunch of ang...
Hello MightyMoe,Once a total station has been correctly calibrated, what instrument errors do you suppose 2-face readings will eliminate that will rem...
Yes Scott, or total stations make it to the baseline every year.
rfc,As far as I'm aware you should check and adjust all of the parameters that the manufacturer deems you worthy of running the routines on. for our i...
Hello Equivocator,May I ask what brand of instrument you use and which company services them?'Bumped in transit' is a phrase I've heard before. I just...
Call me pedantic, but, my best practice is to arrive at a station, set up the instrument and tripod and set the total station to rotate continuously f...
Well I run the instrument through it's 'check and adjust' routine as often as suggested by the manufacturer. Through repeated FL/FR observation of rou...