@dooryardsurveyor We actually did contact technical support about this issue before we started working from home.  I first encountered this issu...

@andy-j There are no options or settings. It goes straight to selecting either Linework or Points.

@peter-lothian Thanks! I knew I'd seen it somewhere, but I couldn't go exploring since I was in an endless loop.  It could be that I don't use t...

@ladd-nelson Adding a suffix is not an option for arcs. At least not anywhere that I've found.

Here's the next stupid question.?ÿ I'm still trying to get the arc labels set, but trying to use the Stack Label Arc command.?ÿ From my previous post,...

That's a divining rod.?ÿ I remember my grandfather having one.?ÿ That brings back memories.

Oh, and as for notes, whether it's dedicatorial language on a plat, or metes and bounds or notes on a survey, I personally prefer to see it written wi...

Obviously local standards and personal preference are the biggest determining factors in answering the OP's question.?ÿ For me, learning and using Cit...

@jph Can you locate the linetype file, then post either a screen shot or copy/paste the definitions for the stone fence and wood fence so we can get ...

@jph There's three ways of tackling this.  Each require that you find out what linetype file (.lin) is being used by the C3D users, and its path...

@norman-oklahoma This is probably the correct answer, or at least the correct line of thinking.  Has the OP verified that either: The linetype...

Congratulations Dave. Do you have a hobby that will keep you entertained? I look forward to a time when I can fish every now and then.

I didn't watch all of your video, but I liked it enough to search for them.?ÿ They aren't on Qobuz, which is my favorite music service, but I did find...

This always works for me.

@cameron-watson-pls How can people work with such tidy desks?  My desk only looks like that if I'm going on a three week vacation.  

@bound_hound Intellicad may be your problem.  Hopefully some Intellicad folks chime in.  Some of the functionality is lost when using Intel...

@scotland Glad that helped! I've been getting settled in to a new (old) job and have been away from the board for a couple of months.  It's alwa...

Be aware, Carlson is not a CAD engine, and it runs in several different flavors. You can run Carlson on an AutoCAD OEM, full blown AutoCAD, or Intelli...

I don't do any cadastral work, but I guess my thought would be that this would be more geared toward Map 3D rather than Civil 3D, at least for the dat...