That did it, thanks!

I thought the network solution was a single baseline because you are receiving corrections from one virtual reference station (whose data are modeled ...

Actually (the DC just came back into the office) it looks as if you have to set the survey style to store the QC & Vector data. I guess most peop...

I have seen a robot lock onto a small piece of quartz that was embedded into a mortar joint. One should take steps to ensure that the robot is truly ...

My hypothetical eliminates "GPS" receivers entirely. The tower becomes the satellite.

I saw that there were other threads about lightsquared. Lightsquared is an asides to my original subject of land-based positioning.GPS was conceived ...

From what I understand there's a company called lightsquared that is trying to build a bunch of towers that broadcast a powerful signal.:-)

After looking at the drawing, you would have two tics on each side whether they were centered or if your grid started at 0,0.

17VAC15-60-40

Yep, .5" all the way around. Sometimes I do 1.5" on the side that it will get the clamp installed.

One sheet 18x24.

Currently I centered the tics so that the deficiency is equal at all four sides.

All sheets must be the same size.