I'm supposed to be on vacation...
I ran into a problem with three points collected with my Trimble R8 units.
I used fast static sessions because all I needed was a fast way to traverse around a fenced-in bugger of a site.
I'm not interested in the actual positions of the points, just the relative positions of the three points, horizontally and vertically.
But...
You guessed it...
I can't process the data, thanks to Trimble's Billion Second SNAFU....
Can anyone throw these files through TBO and send me the coords, please?
They're all in California 83 Zone 2.
I can't seem to upload the files. If you email me, I'll forward the files ASAP.
THANKS!!!
Hopefully, I can get this little drawing out of my hair by the end of the day and get on with a week off...
Ian
I don't know your email address but am willing to help. I just got the demo disk for TBC so it might take me a bit to process the files. If somebody else can do it faster go ahead.
John
Thanks, John!
My email: ian.wilson at cardno.com or ianw58 at gmail.com (replace the " at " with @, ofcourse.)
Wow!
Just over an hours and there have been more than 77 views and John stepping up to help out...
What a site!
Thanks, Wendel!
Thanks, John!
Outstanding, John!
Exactly what I needed.
The point with the big number was apparently a kinematic point. I must have left the rover collecting as I moved between fast static points.
I can't thank you enough, John! I owe you an adult beverage when we get to meet face to face.