New (to me) is a Trimble Geo XH 2005 and Terrrasync 3.21.
I am attempting to use a RTCM 2.3 NTRIP real-time external source. "Carrier time" is counting and exceeding 10 minutes and the External Source is configured as: Single Base, Internet, rtgpsout.unavo.org, 2101, http://www.unavco.org/instrumentation/networks/status/pbo/overview/P439&apos ;">P439_RTCM, Auto, Any. (Baseline is 56km.) Logging Settings are: Log Carrier Data - Yes, Style - Time, Interval - 1s. Viewing the real-time status indicates that Connection Up-time incrementing and Data Received increasing, however the "External Source" is always "Waiting".
What is required to get real-time carrier phase corrections operational?
Thanks in advance.
Upon further investigating, the rtgpsout.unavo.org source table indicates RTCM 2.x message types 1, 3, 18 and 19, however decoding the stream reveals that the Type 1 Differntial Corrections are absent and the messages are actually 3, 18, 19, 23, 24. As the Geo XH 2005 is not RTK capable it's ignoring the type 18 and 19 messages.
Anyone know of any public ntrip casters that still broadcast Type 1 messages? Any benefit over SBAS?
Hello Goodnight.
On September 3, 2015, you asked a question in the forum about whether there was still a public NTRIP that issued in the RTCM 2.x protocol
Today I am also interested in the subject, and I would like to know if you managed to obtain the information you needed to connect to an external source with your Geo XH 2005.
My email is [email protected]