looking to buy part no. 571-125-950

Here's one in Japan?

http://global.youthwant.com.tw/zh_tw/public/jyahoobid/jyahoobid_auctionItem.php%3FAuctionID%3D169620955&prev=/search%3Fq%3D571-125-950%26start%3D20%26hl%3Den%26sa%3DN%26rlz%3D1C1GGGE_enUS423US424%26biw%3D1280%26bih%3D713&sa=X&ei=oEFKUeHeC5SC8ATmsoCADA&ved=0CEYQ7gEwAzg U">English via translate

If that does not work here is original site.

Hi Dane

There were a few of these on ebay in the UK, just checked and they've gone now.
You could try some of the Trimble dealers, they might have trade-in items as Geodimeter was taken over by Trimble.

Just out of curiosity, would that part bring a standard prism assembly to a 196mm offset? In other words, would it make it leapfroggable?

Ralph

Ralph, yes it's a component part of the traverse kit, in fact there are three threaded adapters supplied with it which screw into the top so the prism height matches the 400, 500 and 600 series total stations.

> Ralph, yes it's a component part of the traverse kit, in fact there are three threaded adapters supplied with it which screw into the top so the prism height matches the 400, 500 and 600 series total stations.

Thank You Artie

Ralph

I had 2 thefts last year and I lost 3 of these adapters. I used them when traversing.