First question on the application: How do you spell "surveying".:-P 😀 😛

I got screwed by this often enough that I learned to locate and store the back-sight point then toggle the prism constant setting and re-shoot the dis...

I had similar issues with TopSurv 7.5 through 8.2. The best solution I found was to shoot the back-sight and check the distance. If it is off by the ...

I originally went with an all Topcon setup so that if there were problems I would know where to look. While the integration of the system was great, I...

Check the baud rates and other settings on both the 4000ssi and the PC. Some software will use different default settings than the 4000ss is set for.

Initially I thought that it was a distance problem so I looked to see if SurvCE was broadcasting at the max power and tested the max radio distance fo...

I've noticed data files with wrong time stamps after transferring files from my FC2500 to Win7 using Windows Mobile Center but hadn't investigated the...

Better to leave the baggage behind. Setup the new machine close to your existing computer and load software on the new machine while you work on the ...

Blu-ray burners have gotten cheap and the disks hold 25GB on a single layer disk or 50GB for a double layer disk. Not a bad choice if you want somethi...

A good middle of the road method is to add a pair of drives in a RAID-1 configuration to the stronger of the machines in the office. These drives are...

More than once I've had every machine on a network infected because a virus got on one machine and spread through the network to the other machines. ...

Here's a link to the manual for the R7 & R8's that describes the setup procedure for using the Zephyr Geodetic Antenna. It make no mention of the...

When I cross-graded from LDD2i to plain AutoCAD2013 the dealer was able to give me a reduced price whereas if I had bought direct from Autodesk my LDD...

I run a similar set-up. It's a Logitech MK700/MK710 keyboard with a M705 mouse. They both connect to single USB dongle attached to an extension cable ...

The modem and the Leica were probably both trying to use the same COM port or maybe an IRQ conflict.I had a similar issue with Win-XP and a Husky. I ...

I've read of issues with specific drives, but all my recent research says the typical SSD will last several years under normal use. Operations that a...

Yea, I'd say the 600 is toast for Win7 or Win8. The 120SSD will hold you for a while. I have AutoCAD 2013, Carlson Civil Suite 2013, TBC, MS Office ...

If there's still time to make changes, I would recommend a larger SSD. I have a 120GB SSD installed in my Win7-64 machine that I only use for the OS ...