I wonder if electrifried bird tastes like chicken.

Cable TV wires are sheathed in aluminum.?ÿ The section at the pole in front of my house has been repaired a couple of times over the years because squ...

Not on point, but related:?ÿ Surveyors who use 5/8" caps on 1/2" rebar by building the bar up with flagging make me want to do bad things.?ÿ I've gott...

@john-nolton He mentioned losing the signal ie. "not being able to get a measurement" if his prism was significantly off angle.  I was trying to ...

@bill93 I tested my 62mm Seco 6400-00 nodal prism with my Trimble S6 a while back. I found that I could turn the prism until the prism housing blocked...

Fine!?ÿ I'll answer my own damn question. ?????ÿ Thanks to Brad Ott for the offline help. Here's what I found out: In Tennessee a remote notary is ...

@jaro Makes sense to me, but it would take someone who understands optics to tell us if it is just convention or optical considerations that have resu...

Locally, the lower openings are precast and round. Overflows are typically cut on site?ÿ after the pond has been built and the engineer has looked at ...

@jamesf1 I got to work as ground crew when the Experimental Aircraft Association (EAA) brought one of their Ford Trimotors to Knoxville a couple of ye...

Is text box 802 a Carlson contour label??ÿ If so, in Contour Label Options check the box "Hide Drawing Under Labels".?ÿ Label a contour to see if it w...

@norman-oklahoma  I believe he had at least two bouts of cancer that he beat.  I noticed that he looked and sounded dramatically different t...

I was hoping he'd turn the corner. ???

@paden-cash That cartoon alone deserves about 10 thumbs up.

If the TSC3 is WinCE it may work but if it's Windows Mobile I don't think it will work.?ÿ Carlson has SurvCE and SurvPC.....I've never seen a WinMobil...

Access controls that from the survey style and configures the units as you start the survey.?ÿ

@big-al This is the one I used ?ÿ I ran a 1/4-20 screw with a lock washer through the female 5/8-11 so that it protruded out the bottom and could be ...

@big-al  I may have used that plus a short male/male 5/8-11 adapter to put a standard prism on a fiberglass level rod.  Something like this ...

Seco makes an adapter to go between the two. I think it was made to attach 5/8-11 prisms to the 1/4-20 or whatever on the top of fiberglass level rods...

@christ-lambrecht I just checked with my salesman and was told that as long as the warranty is up to date the older versions can be moved to new equip...