Activity
 
Notifications
Clear all
Norm
@norm
Registered
Joined: July 27, 2010 4:35 am
Last seen: November 17, 2024 6:17 am
Topics: 80 / Replies: 1210
Reply
RE: RTN elevation question - rookie

Good point about the BM possibly being on 29 datum. If I were doing what the OP is trying to do I would check the same published benchmarks used in th...

2 years ago
Reply
RE: RTN elevation question - rookie

The OP difference is significantly more than the mentioned local differences that can be obtained using the RTN. RTN's adjustments are global in natur...

2 years ago
Reply
RE: RTN elevation question - rookie

I spent a little more time testing the theory that a translated datum was used vs. the non-translated NAD83 datum of any realization and any geoid com...

2 years ago
Reply
RE: Grid or true north?

It clearly states the basis of bearings is on the grid CA Zone 3 coordinate system as defined by two pipes on the site. I don't see any notes pertaini...

2 years ago
Reply
RE: RTN elevation question - rookie

It may be a datum setting in your field software. On mine I tried a couple settings in CA zone 3 and got 1.8 ft difference around San Jose. The softwa...

2 years ago
Reply
RE: How to handle a Pin Farmer

I advised my client to notify his neighbor to the north that his Surveyor had created a 2.2 foot jog at the fence corner and he would have to construc...

2 years ago
Reply
RE: How to handle a Pin Farmer

To everything turn, turn, turnThere is a season turn, turn, turnAnd a time to every purpose under heavenA time to plant, a time to reap

2 years ago
Reply
RE: Removing Opposing Survey Pin after Court Judgement

Nice dissertation Evan. I agree with your analysis re. appeals. With respect if it is acceptable to remove the pin that lost at trial the owner should...

2 years ago
Reply
RE: The 1320th dumb question on Grid vs. Ground

@field-dog One RTK observation is inappropriate for control. There's most of your 0.10' errors.

2 years ago
Reply
RE: The 1320th dumb question on Grid vs. Ground

The software we're using does have a grid to ground option, but we don't use it. If you did use it you could survey in ground coordinates with both...

2 years ago
Reply
RE: Topcon MAGNET Field Angle Set Report

The difference in the BS is 6" observed and the tolerance is set at 5". I think it may be trying to tell you something.

2 years ago
Reply
RE: Quarterline vs road center line

The abbreviated description from county is W 1/2 OF W 1/2 OF NE 1/4 SEC 18. BLM patent was 1879 W 1/2 OF NE 1/4 SEC 18 containing 80 acres.

2 years ago
Reply
RE: Quarterline vs road center line

How would they know how many acres they have? The real estate agent? By looking at the original government survey I suppose.

2 years ago
Reply
RE: The 1320th dumb question on Grid vs. Ground

Wow - why must we make things so complicated? Would I have Star*net output a "Ground Coordinate" file, and put those into the DC? No! Your cont...

2 years ago
Reply
RE: Topcon MAGNET Field Angle Set Report

tolerances are specified outer limits of acceptability. The outer limits of your angle sets are 7 seconds. I wouldn't want the software to treat the ...

2 years ago
Reply
RE: Quarterline vs road center line

The information given is not official. It is given only as a point of reference. Your abbreviated legal description posted at the county web page show...

2 years ago
Reply
RE: Section 19 Question CFedS

Guess I must have woken up on the wrong side of the bed. Seems like there is more time spent discussing and testing on these theory type questions the...

2 years ago
Reply
RE: Favorite found monument.

One of my favorites was a handsome hewn limestone 6"x6"x31" set at the corner of the county seat town cemetery by the county surveyor about 100 years ...

2 years ago
Reply
RE: Alive and Well

Northern Surveyor 1, cancer 0. Actually, every cancer free day adds to the count. This week had a retired surveyor friend receive an experimental type...

2 years ago
Page 7 / 65