9 times out of 10 when I leave something out of a topo it's not because I didn't see it, but rather because while locating the other features in the i...

teqc qc reportPer the most recent entry in [msg=101542]this thread[/msg], Christof found a bug in RinexDates that triggered on March 1 and is working ...

> I like the electronic rod bubble on the TSC3 that the R10 supports.I wonder how reliable it is. I see that you can set the eBubble sensitivity a...

> I use a Leica 360 and Leica circular prisms with my S6.The S6 doesn't require a tracking diode, i.e. it'll track a regular prism?

> Does anyone know why this is?In the case of Leica, the height is set to that the vertical center identified by the gun is the same as that of a s...

I have a distant ancestor of the A1200, an A20 that I bought in 2001. I keep it in the truck. It no longer zooms -- almost any zoom causes the image...

> What range can you get with these mini-prisms and a modern gun?The Leica 1100 -- which can't really be called a "modern gun" anymore -- is spec'd...

> I had the same problem with the Turbo S II years ago. I discovered that the old Topcon antenna was the problem.I recall a problem reported by at...

> A Leica mini prism with just the point on the bottom and 2 or 3 sticks screwed onto the top is very easy to hold steady and also saves a lot of b...

> How reliable is the mini prism? I've always avoided using one as I have just always used a 1.5' rod for detail work. I don't feel confident tha...

> If you haven't patented this yet, I might borrow that idea if you don't mind.Let's just call it an "open source" tripod.

I haven't read anything about that case since I took Roy Minnick's Boundary Control and Legal Principles class in the early '80s, but I recall thinkin...

Have fun, yes, but check your insurance first. Years ago, when I was working for another company, we were getting ready to do a small hydro job and d...

> You can have them, Jim. But, you would have to modify them, as all of them have the TDC1 connector at one end. I already have a few TDC1 connecto...