Here are the settings I use for GNSS Surfer, not sure if this is the software in question or not. Note, I use mine a little differently, I actually up...
I don't, but I'm sure Tony at NewTech would love to give you a quote on a used setup:
I would say it's worth it if you don't have to use windows mobile 6.5, like is on the TSC3. Just a horrible, horrible operating system.
All Trimble 5800s had internal storage -I have never updated the firmware in my 5800s, I looked yesterday and am running 1.03 I think.. I need to find...
All Trimble 5800s had internal storage -Hmm, now I have to find me an old software firmware update to test this out.
Are you sure it used to log data? Almost all the 5800s I've ever seen do not have internal storage.
I finally figured it out, to future readers of this article, here is what I discovered:1. Connect the instrument to the data collector with a hardwire...
The card is too big, try to find a 64mb or something similar. I ran into that problem once a long time ago and forgot about it.The above link says 128...
My favorite is the last line.-Why are you such a dick? Everything is relative; you should see my friends.
Where are you located?
Has anyone tried this? What do I need at the rover end?You will need a static IP address at the office and a internet connection in the field. the ser...
Viable alternative to UHF?I use a raven modem at my base to send the corrections to my webserver back at the office (running GNSS surfer). The server ...
Because it costs 1/5th of new gear and if you take care of it will last for a very long time?
I use the best of both worlds. My RTK base outputs corrections to a cellular modem which sends the info to my web-server, which serves them back out s...
About a dozen years ago a family friend of mine, a very upstanding guy, stepped outside to break up a fight across the street between some teenagers. ...
I've helped other surveyors before, I can prepare the survey plans and helped get everything approved, then you guys do the mark setting and gps obser...
I've done approximately a dozen of these in the last five years and would be happy to work as a consultant with you for this project. I'll help you ge...
Jim is absolutely right on both accounts. I have AT&T Uverse for business and the static IP is an extra $15 a month and gets me a block of 5 stati...