re-read above, the differences are not from RTK, they are there after the turned angle/EDM distance.

0.10' May Be As Good As It GetsDING DING DING DING we have a winner! What the heck do ya show on the drawing?

That is the fun of least squares, you can enter the data in any order or combination you like.

#=============================================#Resection#=============================================#Appoximate location of STNC K1 1089867 508909 2...

0.10' May Be As Good As It GetsIt's not all that bad. The TS has been to the baseline, it's honest ground distances recorded on paper with no data col...

GPS can tell you where you are, but never how good it is. If you never need to prove how good it is, all you need is a GPS. If you need a high-precisi...

He was one of the few who comprehended that there are age-old indeterminisms between common law and civil law, and he tried to keep that awareness ali...

Have seen this happen now and then, and I keep about 20 jobs in the card. I don't use calibrations, usually a state plane zone or plain ol' TenThousan...

Leica 1200 specific: check the EDM mode, is it "Standard" or "Fast" ? "Fast" means it won't update the angle with ATR after the first shot ... so if t...

Mission planning. Just cuz there are enough satellites doesn't mean there is good geometry.

Every survey should cost minimum $5k, with generous but documented discounts for the truly deserving. If we were really smart we would be writing surv...

OK, "Max = "Deluxe" = my redneck synonym for "Pro" ! I think it's Latin for "of light", but with that extra "e" you will have to pardon my French.

It will either use the coordinates and the reported error ellipse or the deluxe version will use the vectors. Depends on what your rig records and whi...

Thank You, Mr. Griggs! That answers the question completely. Time to study the manual for Leica's "Determine Coordinate System" onboard application. I...