half buble, definitely get on to auto record. 6 seconds sounds a bit long though. because you have to specify what constitues stop, like movement unde...
> The older TPS 1200s run a VXworks kernel, which is a stripped-down UNIX-like kernel. Same as the Mars rover. > > I also checked the "ignore...
hello septicguy,we have the 1200 plus series in R400 and R1000 guise. i can vouch that the R1000 is good to 1000m only under the most favourable condi...
> the 1200+ combined the IR and RL into one board, maybe even one emitter ... keeps the RL much better aligned, now a shop adjustment rather than a...
in the bluedun settings i have enabled the command to ignore AT command errors. it may ave made a difference.jim, my guess is that there may be slight...
this is what an unsuccessful connection looks like:***************************************************************2012-09-27 10:36:22.904 AEST INFO co...
hello Jim,this is what a successful connection looks like***************************************************2012-09-27 10:44:37.385 AEST INFO com.blue...
well jim, turns out my confidence was misplaced; TPS1200 connects fine, GPS1200 no connection. I have some full debugging log files to send you if you...
jim,i have successfully connected our TCRP1205+ to the internet via a samsung galaxy. i expect my trial with the GPS will be successful as it uses the...
> Not sure if the bluetooth can do more than one pairing at a time? > > Use the cable to the ATX1230 if you want to use the bluetooth for the...
jim,our devices are 3G & 3.5G. the settings for the nokia phone were for a GPRS device.cheers.
just managed to connect our viva CS controller to the internet using BlueDUN. i used the settings for a nokia GPRS device.
Jim,CDMA settings:CDMA Phone,modem,yes,19200,none,8,1,RTS/CTSGSM/CSD: no command lines listedGPRS/Internet: Init 1:AT^D, Connect:ATD#777^M
jim,easy fix. bring up the list of 'GPRS Internet Devices' again. press [SHIFT][F5]. all the default devices will reappear again.cheers.
jim,the proper order of things is you must firstly establish an internet connection with your GPRS device. you will know this happens properly when yo...
hello linearaggression,just re-read the manual to refresh my memory on the charger lights. the middle light red would seem to indicate battery problem...
> > The system's owner (a colleague) has been connecting the AX1230 to the RX1250 via cable. Is the RX1250 BT implementation known to be unreli...
hello Robert,are you offered MAC/MAX corrections in your RTN? this differs from VRS in that the baseline data is ultimately connected to a single base...
hello jim,underscore if definitely there. just move to any input field you want to edit and start editing by pressing the red return key. you will not...
howdy ken,as a leica user i found there was hardly any learning curve at all. you know exactly what you want to do with it and how it was done in the ...