Dang, forgot the dot what will happen!!!!
Attached below are several r's and .'s you may use in the future at your convenience...
Please try to use them sparingly and with great care. We certainly don't like to see more than one "." on each monument. If you find a monument where the dot is slightly off, please nudge the cap over until the dot is in the correct location. The "r"s you may occasionally find the need to use more than one at a tine.
Thank you.
[rrrrrr] [......]
Attaboy, Tom. Hit'em where it hurts...........or is that huts?
We have plenty of "R's" up here in MA that aren't being used if you'd like them!
I located the NW1/16 with a ppk session and tied it to a CORS station because I couldn't get radio at the pin which was a rebar I decided to accept even though it wasn't at the exact prorated position (10' south).
Then put my cap on it and checked it with RTK from my control point using a repeater and it checked .01' x ,02' to the CORS processed position. Should have had a dot on it and it would have been better.
no sense in worrying about a dot if you aren't going to at least orient them to the world.... 😉
> I located the NW1/16 with a ppk session and tied it to a CORS station because I couldn't get radio at the pin which was a rebar I decided to accept even though it wasn't at the exact prorated position (10' south).
>
> Then put my cap on it and checked it with RTK from my control point using a repeater and it checked .01' x ,02' to the CORS processed position. Should have had a dot on it and it would have been better.
[sarcasm]pretty much over kill- the moose and goose guy can do it with a garmin rhino in one hand and a starbucks coffee in the other.[/sarcasm]
> We have plenty of "R's" up here in MA that aren't being used if you'd like them!
I thought you used all those extra "R's" on the end of words. Like Florider, Aruber and Vodker.
