Activity
 
Notifications
Clear all
va-ls-2867
@va-ls-2867
Registered
Honorable Member
Joined: Mar 23, 2011
Topics: 7 / Replies: 506
Reply
RE: Need a Carlson/IntelleCAD Guru . . . (*.ctb question)

The plot settings from Model space can be different than Paper space unless you preset your settings.. Inserting another drawing into your active dra...

1 year ago
Reply
RE: Need a Carlson/IntelleCAD Guru . . . (*.ctb question)

Sounds like you don't have your cbt as the default option. If you weren't using the normal template set up when starting a drawing, it might be defau...

1 year ago
Reply
RE: Need help with Carlson FLD File

It looks like the block it is trying to use for the points (SRVPNO1_anno) does not have the attributes defined to populate the data fields. If you sw...

1 year ago
Reply
RE: How many shacknasty surveyors on this website?

I am left handed but have adapted to the right handed man's world.

1 year ago
Reply
RE: Elevations - RTK vs Levelled

@i-ben-havin yes, there is a delay in receiving the internet stream.

1 year ago
Reply
RE: Mavic 3E - Terrain Following

We have a similar site condition witha current project, we split the filght into two parts, one to cover the top half od the slope and one to cover th...

1 year ago
Reply
RE: Carlson Point question

PDMode needs to be set to 0 or I use SPT0 for the carlson point and pdmode 3 for "x"

2 years ago
Reply
RE: Elevations - RTK vs Levelled

@chris-bouffard You would see greater variances if using VRS corrections over internet. On site base over radio will give tighter results due to the ...

2 years ago
Reply
RE: Drone for surveying

Carlson has just announced a US made drone CAP50

2 years ago
Reply
RE: Carlson2023

I have not run into this in 2023 running on top of Intellicad 10.1 or Civil3d 2023. I assume you hae sent them your dwg file with crd and settings ...

2 years ago
Reply
RE: Improving accuracy in open field

Are you flying RTK or standard photo? If standard photo, a few more GCPs would help. Is this all one flight or multiple? There is a big gap through...

2 years ago
Reply
RE: Improving accuracy in open field

Are you flying RTK or standard photo? If standard photo, a few more GCPs would help. Is this all one flight or multiple? There is a big gap through...

2 years ago
Reply
RE: Civil 3d couple questions

@norman-oklahoma Beg to differ, that was a copy and paste straight from my Civi3d 2023 command line. Try -dwgunits

2 years ago
Reply
RE: Civil 3d couple questions

@norman-oklahoma Beg to differ, that was a copy and paste straight from my Civi3d 2023 command line. Try -dwgunits

2 years ago
Reply
RE: Civil 3d couple questions

For the issue of the inserted linework, check the DWGUNITS. Here is mine. -DWGUNITSDrawing units:1. Inches2. Feet3. Millimeters4. Centimeters5. D...

2 years ago
Page 2 / 35
Share: