The assumption is the older receives will be ok with a clear nvram and ephemeris reset. That got them going after the Jan 1 leap second

Tim Libs, post: 424872, member: 12482 wrote: We have the same issue with the rain on our fc-5000...In rain mode the mesa2/FC5000 should perform much b...

Set the tracking to "survey". Not "machine control". The survey setting will take extra time to examine the reflection and confirm its a pri...

If your crews arۻ tearing up the rc units, you could take it off the pole. Most modern collectors will communicate 700' with the SX robot. They will ...

I forgot about firmware updates. Those can be important also Topcon and sokkia can be done in your office over wifi. Others brands should be done at ...

Totalsurv, post: 413672, member: 8202 wrote: My question is should the yearly service include adjusting optical plummets, bubbles, crosshairs, trackin...

I've seen the safety vest be an issue with those old robots. Another thing could be mirrored or reflective sunglasses

Does your data collector or pc have a 9 pin serial? That seems to always connect. would eliminate usb driver issue. Let me know if you need the mobile...

The latest version of tru is 3.1Are you running an older version?

Why stairs.? With a loooong 12v cable that thing could be transmitting 24/7.

Hopefully you can clear NV ram on January 1 and that will be all you need to do.

The Hiperlite and Hiperlite+ receivers have spread spectrum radios . The Srl35 is Digital UHF. They are not compatable

How about a like new Trimble M3. $4700

Here are some low quality pictures. I can send detailed pics after these have been cleaned up

Try going to Configure then Global settings. At the new job tab select Always import code library. If you have a Carlson .FCL code library that can b...