$250.00

I also got it to work with Global Mapper

It must be an issue with QGIS as I can get it to work using Civil 3d.

@lurker There is an option to automatically download the DSM from the internet through the controller.

I had a realtor tell me my map was upside down because the road was at the top on the property not the bottom as I had shown it.

@williwaw That is how I have been using it with Mango Maps -

It might be a bandwidth issue. 9600bps might be bottlenecking, you might want to try 19200bps, if that is an option. The CMRx data packets are a lot s...

I get the same answer as Dave. The hypotenuse of the triangle in the NE quadrant is 26 Extending the "10" line will intersect the end of the radius ...

NMEA output is in degrees, minutes, decimal minutes.

Using TRU try changing port "c" to output "rtcm3" correction on the base and input "rtcm3" on the rover.

Just use the "Hatch" command then "Select Object" and click on the polygon. Make sure you have your desired hatch pattern and scale selected first.

I used Civil 3D 2023 Use the "Area" command, then choose "Object" and select the polygon.

It worked for me, area=311990.542 perimeter=9690.608