Posted by: eddycreek Posted by: VA LS 2867 We just got done monitoring a bridge abutment while the slope protection was removed and a soil nail wall w...
The difference between a nodal prism and non-nodal is just the prism constant used. When the prism is mounted on a pole or tribrach, it then needs to ...
You're always welcome Jim. I'll send you my new number.
Is the horizontal reverse patch a shift grid? Used to using one for OSGB (UK) but I thought the local circuits in NZ were just simple projections. ?ÿ
Is that a concrete slab already poured underneath for the foundation? I bought a property in Lyttelton as is where is. Also needs a new foundation, an...
Before the cab and jib are attached to the top it should stay plumb. If there were high winds then the erection would stop, and yes - measurements wou...
An active mini prism would be great.
jamieinct, post: 455081, member: 8633 wrote: I'm about to make a purchase of a new Trimble S5 robotic instrument but I am considering purchasing a Tri...
eddycreek, post: 453993, member: 501 wrote: Should add theres about 15' difference in the 2, and the garmin locations are skewed slightly from GE. An...
Richard Imrie, post: 454273, member: 11256 wrote: Civil 3D will handle all of those formats. We have Trimble gear and SurvCE on data collectors so I d...
kotuku4, post: 454282, member: 8886 wrote: Yeah the question is what would I need to download/upload the total station and convert to ascii txt, csv f...
The GeoMax is a "secondary" stream fro Hexagon. So they will always be a model behind on the hardware.As for the software it's going to be very much p...
jim.cox, post: 453741, member: 93 wrote: Vision is WELL worth having in my opinion. Makes relocking the prism much easier. Also good for checking for ...
jim.cox, post: 453715, member: 93 wrote: 'Grey Matter' == Human Brain SplattersOn a forensic plot for an assault trial murder trial presumably?
Rich Roberge, post: 453562, member: 127 wrote: Squowse: is this still available? Well I let my robotic go, so didn't push to sell this. But I would s...
I am making a repository of stylesheets for Leica Captivate export. If anyone has any they are willing to share with the general public please email m...
Yes I use one - no problems apart from the Trimble passive tracking. It's easily distracted.Certainly finds the prism OK. Ironically better than the L...
DaveJay, post: 452246, member: 12592 wrote: We do set prism poles on tripods over the control points to do the resection, usually a three point resect...
DaveJay, post: 452232, member: 12592 wrote: In this scenario I'm talking specifically from a machine control standpoint. If we're paving a roadway, in...