I just upgraded my video card (2060 RTX), so I am in the hunt for a new pair of monitors - I have a rack for 4, so I may just add them in Back in the ...

I rarely use a 360 and stay with a circle prism - there is a bit of vertical error with some of them and it is not hard to keep it facing the gun for ...

I got my MS60 about a year ago - got it stolen in Sept and replaced it - I agree if you want to offer scanning, get something like a P20, I just did f...

I agree about two markers or at least a difficult one to pull - in these cases I have set a forming pin with the holes in it and put nails in every ho...

Can you set your stakeout to use polar and distance - then you can just stake the last stored point and be 100 feet away from the last point I have a ...

@james-vianna Cell sites covered the hills there and I was just gathering antenna data so low liability 

I think there was 19 locks, plus the one on the ground - heavy as hell too

With a short leg, you will need to add a centering error - this will open up the angle error to match the short distance under options - instrument - ...

Sixty feet of the section is burdened, they do not want the right of way burdened, so just the 27 feet along the edge of the 33 R/W

I have been using these from Stakemill for monuments ties and control - I save the good ones for boundary A little thinner but sound when I set them i...

I had a guy come after and set Hilti nails Turned him into the board and after many years they took his license