The main difference I can see between North American survey system and NZ/AU is that while we monument the boundary corners, nearly always with wooden...

@hawko?ÿ You may need to explain what TAFE is as not sure anyone outside of AU will know what it is.

@john-putnam?ÿ Luckily with all the newer gear the 1w radio's (in NZ there are 3 public frequencies for RTK GNSS which can use 1w 25khz UHF, can get ...

And Geomax is Lecia level hardware at half the cost if you don't mind XPAD or you can use SurvPC and can make do without Lecias dedicated field contro...

Not the receivers themselves but have had problems with UHF radios in dark coloured pelican cases with base batteries on 30?øC days where box gets way...

@chris-mills?ÿ Curious why you hammer in a screw rather than use a masonry screw (not many that short I've seen through) or a tap in masonry anchors ...

@john-putnam?ÿ Think the active stylus (like Samsung's s pen) is the answer to several problems with capacitive tablet screens that need to be used i...

@minbarwinkle?ÿ Nope, we use ellipsoidal distances for boundary here (GNSS easy enough and apply sea level correction to get within mm's for TS) so n...

And then there will be the next phase of GNSS networks to support autonomous vehicles...

@norman-oklahoma?ÿ That's what I'd figured was your quality of practice given the other useful comments on here.

@norman-oklahoma?ÿ Will preface this with a disclaimer that I expect you do technology independent checks and are working within necessary error budg...

@martin_au What is the real world impact of tilt on point precision vs pole (known runout <3mm and 8' bubble adjusted correctly) and bipod for a ...

@jimcox?ÿ Presume you were comparing to a standard smartphone? Excellent real world feedback. Wonder if those glass screen protectors world make any ...

@jerrys?ÿ The other drawback is the fine threads that locks the pole in place is sensitive to dust/grit and gum up pretty easy, at least the Leica GL...

@john-putnam?ÿ That idea about the antenna type is excellent as can do that with Leica software, one of those obvious things I didn't think about. ?...

@john-putnam?ÿ Pretty sure the GAD31 is not long enough to clip to a bayonet pole and have the GNSS at the height the pole graduations read? Sure we ...

@norman-oklahoma?ÿ That is not a Leica made pole adaptor, well aware of those Seco ones but it will not make one of the Lecia poles read the correct ...

@shelby-h-griggs-pls?ÿ The only problem is they don't make one pole with adapter's for bayonet/5/8th thread so need pole for robot and another for GN...

@oldpacer?ÿ Sounds like you are referring to the Lecia GLS13? If so the pin is great, easier than the Seco pin for sure,?ÿ but over time/rough use th...

@350rocketmike?ÿ I store photos much smaller than that, nothing more than 1mb an image. ?ÿ Use Brice Lambsons Image Resizer,which is now part of Mi...