Have you checked with NEI? It's possible that you could get a good deal on a new one now that the TSC7s are out. It's also possible that they could be...

Sounds to me like the erroneous rover is getting a phase center coordinate over the radio and treating it like a position at the ARP.

Here in rainy South Louisiana the difference between ellipsoid height and orthometric height is on the order of 4.4 ppm

My suggestion would be that you get your Trimble rep to come out with one and run a thorough, real world test on it. How well it works and how practic...

Yes you can run the configuration update, but you have to know to do so. Current versions will update it if you check for updates through the software...

Have you tried the Internet Download command in TBC? It wouldn't surprise me a bit if they have links to all of those stations.

The photogrammetry bailed me out a couple of times when the SX10 didn't have scan data on something I needed to pick up, but you need to see the objec...

I seriously doubt if TBC 2.40 recognizes those antenna types.

I haven't kept up with what features are on what models, does the S5 have active tracking? If the only difference between them is the camera vs. the t...

To you have TBC? I rarely send single bases to OPUS (I do send networks to OPUS Projects).

When mixing we use the R8 as the base. You're going to get better results with an R10 than with an R8 in any application, from my experience, and I'd ...

I like to have it done yearly; part of the reason for that is to be able to certify to clients that it was done within the previous year. If you calib...

Maybe it's different now... when I was still selling and supporting Trimble gear seven or eight years ago the S series instruments worked a lot better...

The instrument does supply the pressure.

This is one of the few situations where I'd consider using a site calibration. If you calculate everything from the found PK using your best guess of ...

You can easily configure the R6 to start logging when powered up regardless of the firmware version.

The link provided above is to the Style Sheets download; you can download individual ones and call them in TBC from Job Report Generator as described ...

If you use Trimble Access and use an FXL file you can just add date, time, or both as attributes for whatever feature codes you want to see them on. Y...

You can also auto generate date and/or time stamps as attributes, export date and time using a custom export mask, and view the date and time of each ...