CAD guy: Hey field guy can you describe the method you used to locate "building corner" Field guy: which building corner?CAD guy: you know... The one ...

In your example of having multiple points in close proximity being able to select a position by a point number would remove the possibility of selecti...

Another thought...1. you have one point with known coordinates that you wish to hold2. you have done rtk work from this point alreadyIf you have rtk...

If you have the projection and the proper scale factor set in your drawing you can select to label the scaled distance in the annotate defaults tab. ...

OK, What Did You Say That NGS Agree With ?I think Norman is stating that a handful of OPUS-S or OPUS-RS solutions (even from the same day) do not cons...

Once NGS has the Triumph 2 antenna modeled I will likely buy one just for OPUS-DB work. The potential to use as a network rover makes this a pretty at...

Looks like a great plan Scott!

Network rover or base/rover set up for the GS14?

We used a small marine battery with gator clips. You just need something like this:

Simply beautiful.

FWIWMaybe I am wrong, but I think the preliminary results John posted are in meters.

I see. I am quite interested in John's final results.Thanks Loyal!

Does OPUS Projects hold all CORS as fixed?I assume you may be seeing "better" looking results since you appear to only be holding one CORS site in you...

I worked with one individual who used Civil3D to adjust his traverse data. Looking back on it... he must have had a thing for pain!I looked into doin...

Not me 🙁 The oldest GIP I have found was set in 1916. Set by the county surveyor and still in place under a county road! :good:

Great stuff. Every vendor should promote the viewing of this webinar before using RT gear!