The usual Trimble firmware procedure is to connect to the receiver and use Trimble Installation Manager. That checks the hardware capabilities and li...

> I learned about lat/long being the “true” measured positions, and grid coordinates are the calc’d ones. True, but only up to a point. If you cha...

I think it unfair to blame Trimble for decisions made by your telecoms provider to close down 3G Trimble had NO say in that decision. 3G still works ...

If cost is not an option, you really want a Trimble R12.They are just simply streets ahead of anything that came before - especially under canopy

CPU and motherboard together really define the machine Personally I prefer an Intel CPU and Gigabyte motherboards have always worked well for me. So m...

Depends on wat you mean by 'construction side'.I would think those documents would also apply to Siteworks and Survey Pro. I don't think there is anyt...

> Does anyone here know what he’s lacking? Control of the base station.If you are not running the base station yourself, you are at mercy of what ...

@vcshop Try here...

There is a program Tdlconf to configure the radio which will set the receive frequencies.But if it is a Transmit frequency you want to set you will ne...

Unfortunately Access2017 does not support the Geo-Referencing. Presumably he's using that version because its a TSC3 (2017 is the last/only version th...

Like Chris I am not a fan of field calcs - they are risky and difficult to check. But sometimes you gotta do what you gotta do I save the newly calcu...

Sorry guys. Christ-lambrecht is quite correct It won't work. Access will work many 'off-brand' total stations And gnss antennae But not the receivers...

> — notably, the Access export uses <REFERENCE_FRAME> instead of <REFERENCE_SYSTEM> throughout, and adds a cryptic prefix to the refere...

And the silence was absolutely deafening. No replies in a week. There's your answer, Mate.

Just generating that list of jobs on your controller takes time. More so if you have your controller set to sync with the cloud And even more so if yo...

Only when I'm working with the pole up above head, or buried in the bushes, or I'm busy watching traffic...

No - not every time. Project data changes daily, but the system and config much less so. You have to take your project data off to process it - so tha...

I find she gets a bit much after a while and I turn her off. But I do like having the vibration on to confirm when a point is stored - very handy when...