Hello Kent,>...if it were used on an EDM that makes software corrections for the cyclic error, I think it's worth noting that the software correcti...
Thanks for the kind words Shawn.
SD cards for LeicaHello Bruce,The companies I've worked for have used Leica and non-Leica CF cards. It gets hot here in summer (>100*F) and cold-is...
Or if you prefer:A=0 2 0 01 0 1 00 0 0 21 0 1 02 0 0 00 1 0 10 0 2 00 1 0 1b= 0.0020-0.0007-0.0005-0.0011-0.0016 0.0010 0.0006 0.0000Now (AtA)-1*(Atb...
Hello Joe,Did you guys do the big firmware update that was out, from memory, mid to late last year? It fixed some upcoming satellite tracking issues.
Hey rfc,Kent was just using chalk marks for positioning his instrument stations in roughly the right spot in the cyclic error wavelength. He only need...
> As you point out, the means of the distances 1-4 and 2-3 are the best estimates of the sums of the measured ranges. While the measured ranges con...
Hello Kent,I'm going to wing-it without referring to texts because I like to try to work things out myself first.What you seem to end up with is a ser...
I'm ready to put this one to rest.> > In other words, the EDM is returning a range with a cyclic error of 0.0mm at 24.0m and would be expected t...
> Curious, Would God Bless America be considered Political and Religious ?Hey djames, How could it not?
> Ok, thanks - I guess, in my head, I was imagining that re-setting to zero would re-set the circle back to the same position, (as if zero is a cer...
> Loosen the instrument tribrach and turn it 5* or so, recenter and repeat the procedure. > > Conrad, when you do the above do you reset the...
> Thanks Conrad, that is interesting. So then, my math says that I should not expect better than 0.03' repeatability of location per roughly 328' ...
> Conrad, I do like the way you use words.> > Parts availability insurance. Bingo.> > Accuracy fetish. Well put.> > For this du...
> Is there any mechanism for marking where the pole is stood on something like concrete when using a larger pole?> > I normally use a fine d...
With the right equipment in good order and adjustment I don't know why there'd be an accuracy difference between one and two man operations. At least ...
> Does it mean all of the onboard application licenses in the TCRP1201+ are carried over into RX1250T in full robotic mode without paying a single ...
Of some interest might be a paper which tests the EDM ranges of a Leica TDA5000 or similar with a range of Leica corner cubes reflectors for industria...
There is a third option which you might consider which is finding a second hand RX1250T which will communicate with the RH1200. Here in Australia our ...