> New to the board. Using tds survey pro with nomad and topcon gr3. How can I run grid (state plane) north but output ground coordinates? ThanksO...
I would like to add that I have been a few minutes off the original back bearing several times. It is the nature of the beast for a traverse like you ...
I am not a statistion or a favor of an adjustment of a traverse. I do adjust raw data to analize the results though. My old boss did this and I guess ...
> Let me know if you see a big difference in the existing control. Dirt is built using that> > I did a site calibration using control on bot...
I have been in that situation more than a few times. I have found that after 6-7 hours of drafting my production drops and my errors increase dramatic...
I have not seen much difference in the project control. I ran through 4 project monuments on the east side. One monument was about 0.04' different in ...
Jon,It is the bridge with the recently replaced span.Josh
Thank you for the contact information.
> trig-levels for sure!!!> > If you can get a 1" gun.> > Observe both directions, apply curvature and refraction and mean the results, ...
> I think Jim's method will work for you, if not only for the simple reason that the total station/theodolite will generally have a higher magnific...
Dave,Yes, This is for a bridge replacement project. I actually shut the existing bridge down at 15 minute intervals and ran 3 wire one way between exi...
Maybe try changing the broadcast from CMR to CMR+. I think RTCM 3.0 or RTCM whatever is Topcon language. Forgive me if I have the acronyms reversed as...
Dealt with one today. I have C3D 2012 but the version I received came from a newer version. Get a friend to dumb it down by export to ACAD from newest...
When you use the multi track prism, try setting it to semi active tracking when doing vertical work. I get better vertical results in that tracking mo...
Call for the adjoined prevents gaps and gores. You must do your best to gather all evidence to put that line on the ground. Call for a ridge or hill i...
I appreciate all of the input from the beer leg forum. I lean on my fellow professional surveyors when I need advice. Thank you for your comments and ...
> In my mind, we have a responsibility to ourselves as a profession AND to the general public. Helping cease the activity is the goal.> > I b...
Thanks for the input.Definition per the KY MSPBoundary survey" means a survey to: (a) Determine either the entire perimeter of a parcel or tract of la...
