cls, please don't take this the wrong way, you mentioned in your original post that the short side was too long. Was that taped measurement horizontal...
billvhill, post: 426149, member: 8398 wrote: How can the cross ties match if one side is off If he's set out a trapezium the cross ties will match. M...
Elevation mask might be worth checking, not all receivers default to 10 degrees. Had this happen with hired Hemisphere kit on a hydrographic survey, i...
Had a look at satellite numbers/geometry for the time of the obs?Might be some clues in your raw data, pdop figures etc.
Roby, useful info here, in this thread on this forum, from February:
Well, we don't get the spectacular extremes you get in the US but we do get the wind in the north of the UK, currently:
Wild guess here... in your op you described the site as a 'parking lot'. Were there lots of vehicles and possible multipath? Not intermittent, which y...
That pub's still there James! As I write it will be packed to the door and noisy, Friday evening of course.
James, it's just over 400 miles by road and ferry from where I am in the Orkney Islands to Newcastle. Straight line distance is about 300 miles I thin...
Pat, I'm around 400 miles north of that area, however, hopefully Chris Mills picks up on this thread as he is much nearer, he'll have local knowledge....
Thanks again to everyone for the further advice, Lots to think about!
Are they hot rolled steel, concrete or masonry? What are the accuracy requirements?For steel I usually do a quick independent check using a Leica Dist...
Thanks to all for the generous advice. Lee D has it in one - so many places, so we'll do some homework and plan for doing a few places properly rather...
Great true story, one to get the kids interested in:
Michael_Forbes_(farmer)
I don't think I can think of any hostile or aggressive signs hereabouts, Scotland's a small country and reputation alone is usually a deterrent - acti...
Hmm, not sure if the competing countries in the long running measure Everest competition can even agree on a geoid height to start from. At least ther...
Try deselecting all the Glonass satellites. I had a latency issue a while back and it was Glonass related. Is the number of sv's display jumping from ...
