Notifications
Clear all
Topic starter
I don't like the method that Topcon MAGNET Field uses to check angle sets. Our HA tolerance is set to 5 seconds. According to MAGNET Field my angle set failed. I say it passed.
My method for checking this angle set is:
BSD 44 0°00'00"
FSD 47 350°16'35"
FSR 47 170°16'34"
BSR 44 180°00'06"
===============
BSD 44, 00" - BSR 44, 06" = 06"
FSD 47, 35" - FSR 47, 34" = 01"
06" + 01" = 07" / 2 = 03.5"
03.5" is within my HA tolerance.
Posted : April 27, 2023 5:26 pm
