Hemisphere GNSS S320 RTK Kit (same as Carlson BRX5)

Why am I selling? I need to reduce the amount of gear so I am selling this kit on ebay if you are interested ( http://r.ebay.com/WkFfAz )
It is actually a very nice kit, same as the Carlson BRX5 GNSS with solid performance with the recent Athena GNSS engine.

DETAILS:
This kit was used by me but is fully functional and tested. This is a great system with dual hot swappable batteries meaning you do not have to shut the GNSS engine down to change out batteries. When logging static data, the base can last 8 - 10 hours on the 2 rechargeable batteries. This kit was used entirely for GIS mapping work 2-3 times so no dirty rough construction sites. It uses the same batteries as the late Trimble gear (5700, R7, 5800, R8 etc..) so you can replace those easily but I have included new batteries.

This kit is completely updated with the most recent firmware (v5.6Aa03). It is a great alternative to the expensive Trimble, Leica or Topcon receivers kits and worth a look if you are looking for capability at a great value. The S320 is optimized to work seamlessly with Carlson SurvCE software as they have also released their own re-branded model. You can use the Carlson Brx5 device selection in the SurvCE receiver setup for the best experience.

I will take care of the shipping by UPS and loss coverage, you only need to cover duty or customs fees if they are applicable.
Priced to move, base and rover kit for only $7900 USD shipped to continental USA.
Thanks and let me know if there are any questions or concerns,
Matt
____________________________________________________________________________

MORE INFORMATION:
Featuring the Athena GNSS RTK engine, the Hemisphere S320 receiver is very capable and productive. The S320 GNSS receiver supports a wide range of satellite signals, including GPS (L1, L2, L2C) and GLONASS (G1, G2) tracking capability means you will have more than enough satellites to stay productive.

The S320 can receive RTK corrections from any UHF base station broadcasting in Transparent EOT or Trimtalk format (12.5k or 25k spacing) and CMR, CMR+, RTCM (v2.3 and v3) or ROX protocol. The internal UHF radio can be programmed by the end user to enable any licenced frequency (no trip to the dealer required). Also, the onboard 2G GSM modem can receive NTRIP corrections with a data-enabled SIM card inserted. So you can use this kit as a Base and Rover pair or use both as network rovers with an existing base receiver.

If you use GNSS for static base station logging, there is a removable SD card for data logging, this can be activated by the field software or easily on the receiver using the multi-function buttons. There is a free RINEX converter available at www.hemispheregnss.com.

This receiver can be operated with Carlson SurvCE or MicroSurvey Field Genius field software on your windows mobile data collector. (not included)

• Athena GNSS RTK Engine and no-cost firmware updates (most recent version April 24th, 2017)
• Each receiver has base or rover functionality with
• 430 - 470 MHz. UHF transceiver radio (1W) in each unit, can be programmed to 12.5k or 25k spacing by user.
• Sim card slot and GSM Network Roving module (2G) in each unit with automatic SMS communication functionality
• removable SD card slot for data logging, static work with OPUS or RINEX conversion
• Dual battery slots with hot swappable rechargeable 7.4V batteries (same batteries as trimble 5700, 5800, R7, R8 etc.)
• Antenna bracket to invert antenna and gain range
• Dual Bluetooth ports, meaning you can connect to a mobile hotspot and data collector at the same time
• Level Sensor with live digital level functionality in Carlson SurvCE 4.0 and above
• SureTrackƒ?› Intelligence, will use GLONASS in in solution even if base is GPS only.
• Compatible with Pacific Crest, Trimble or Satel UHF radios using ROX, RTCM, CMR or CMR+ messages and trimtalk or transparent EOT protocol
• Hemisphere PocketMax3 PC application for additional settings, configuration or performance monitoring.
• SBAS/WAAS rover capability with 30cm accuracy.
• NMEA message output up to 10 Hz. (20Hz. optional)