In reply to the OP. Do you conduct survey work without a fully signed scope of work and fee? Without one you don't have much efficient recourse.

All of the above options are good but be sure you're in compliance with your state rules regarding electronic/digital signatures on your professional ...

My understanding is that they will no longer be allowed to be sold in the US after a certain date. Needless to say we'll not be replacing our 3 DJI d...

As with any software....it depends. What are you needing to do with the software. If it's just email, word a spreadsheet you can probably go the chea...

We used fixed height tripods exclusively for all GPS work. I would highly recommend them. We never (outside of poor gps areas) had any vertical issue...

What you need is appropriate field and office software that work together seamlessly and a set of processes and procedures. While your current method...

I've dealt with similar issues in ID for decades. There is no straight answer, it's all about the research, deeds and what's on the ground. Around ...

Civil3D is not a GPS processor at all. How do you analyze your GPS data before it's pushed downstream for use by you and others? I'd be extremely c...

Do you have a wearable SLAM scanner? We've used our VLX3 on shallow <8' Manholes with success.

The concept makes sense but the application might be lacking. I assume you are traversing due to non-gps friendly work throughout the corridor? If ...

Knowing the right tools for the project and knowing the ins and out of the tools they are using. Don't be afraid to explore the software/hardware. - W...

I've been around the block(all at engineering/surveying offices with 1 exception) a bit in my career and can't say i worked anywhere that has had a cr...

@RobertUSA While i can't argue with saving $ if you don't need cloud services. But it pays for itself on a monthly basis in our workflow. The ability...

Sounds like you're using Trimble and i assume Access? We use Trimble Sync manager, all data collector files get duplicated and saved to the cloud dai...

Somewhere in the printer settings there is an option to rotate the prints 90 degrees.