Sent. Good luck! GB

Hello Tom - When I became a Trimble dealer in 1996 the TrimTalk 900 (affectionately known as the TrimWhisper 900 due to limited range) was rapidly fal...

Hello Jon - I also updated to Carlson Survey (and Civil) 2024 with IntelliCAD 11 just this past week. All my function keys work as before (Carlson 202...

It's good to hear you are at home now!

MM sez: "What’s the point of thinking it’s RTK when the position has to be found after downloading the receiver files and processing them?" Take a lo...

Mr. Moe said - "A base/rover can operate without a DC, simply collect at the Rover and later post process the data." The same base/rover can also oper...

The Trimmark 3 is a completely different product. Please send me a private message describing what you need and I will see what we can do. GB

Since Version 3.32 (June 2023??) QGIS (an open-source and free GIS program) has had native LiDAR tools that seem to be working well. The basic workflo...

I met Dale at some surveying conference in years / decades past, maybe one of the multi-state get-togethers. In June 2019 I visited our family farm so...

If the offering you found via Facebook suits your needs I suggest you pursue that option. Thank you. GB

Like these? The threads seem to be M6x1. Do you also need the brass "wedge" nut shown at bottom right? Apparently you are in the Philippines, will h...

May want to take a look at the Wikipedia article on "Miner's inch", which says the definition varied across the jurisdictions. More from placer and hy...

The Topcon GTS-2B had nothing that could be called an RS-232 port. It would output the slope distance through the coaxial (two wires) power port in ...

@kevin-hines Your book is now in the dedicated and capable hands of the United States Postal Service. It should arrive there a week from today. Tha...

@norman-oklahoma Start by drawing an equilateral triangle that includes the long side to the left. Then recall the hint about 60 degrees. GB