Hey mate, ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ I've been using the cheap ebay ones for about a year now, using them as control for subdivision construction. I haven't...
Hey mate, ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ I tend to agree with John.P. above, the figures you've stated convert to 12mm H 27mm V, while it's not great I've s...
Hey mate, ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ?ÿ Have you tried accessing the level through active sync? I used to do it this way with some Topcon and Sokkia equipment b...
Hey mate, ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ I use reflectorless for tape targets with Trimble instruments, I assume that's what you are using considering you...
Hey mate, ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ?ÿ All the major survey equipment manufacturers have pretty intuitive survey software. They all offer the ability to calcul...
I can't think of much, but trey the following: - Try changing the radio channel? Just a thought but maybe there may be something or somebody else in t...
Hey mate, ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ?ÿ I don't use a CU controller, but I know that the battery on the holder sits exposed, maybe check the connection points f...
Hey mate, ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ How accurate exactly do you require? I'd assume you need survey grade accuracy for paleo work, and I don't think you ...
Hey mate, ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ Looks like you have point symbols switched on. You may need to switch them off, but for life of me I can't remember...
Hey mate, ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ Sounds very odd, the fact that it's only happening when VRS and not all the time makes me think there may be a settin...
Have a look in the battery compartment, there might be a small button with 'reset' next to it which can only be pressed with a ball point pen. From me...
Just another thought, the Nivo C series and Trimble M series are cast out of the same mold aren't they? Maybe the drivers for an M3 Trimble might work...
From memory reflectorless is used to shoot reflective tape targets for Trimble instruments, so maybe try setting up a new prism using tape target prop...
Check project settings>coordinate system. If something is selected hit clear projection and see if that helps.
Another option may be to use 3D Office to export the points.?ÿ I've had a couple issues with Magnet Office v5.0.1 aswell, found that we can't import a...
As a side query, where does the old CU controller fit into Trimble's picture? The impression I'm getting is that Trimble is moving away from Windows c...
Hey mate, ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ?ÿ Have you checked both the program or project settings? I just gave it a test run then and it seems to work. It needs to be ...
Hey mate, ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ ?ÿ Not sure if it's any different with the Nivo, but when using it with an S-series Trimble you press the prism icon and it w...
Over here in NSW Aus., they only require registration for cadastral work, but ironically the most claims which are lodged are apparently level related...
