Last seen: November 18, 2024 9:10 pm
The one I have for my older top cons also requires the removal of the eyepiece. Mine requires that I screw the eyepiece onto the end of the 90 deg tub...
Carlson Survey is listed at $1750 but you might do better through a dealer (they often have unpublished discounts available).?ÿ If that is too stiff f...
@noodles Don't worry, I had to look it up also.?ÿElephant Joke?ÿ Variations of elephants in cars are about half way down the page.
For E&O I'd contact Nancy Williamson or Candice Tickle at Insurance Services Corporation of America 800.853.6133.?ÿ E&O is their specialty but...
I'm running Carlson SurvPC and Trimble Access on a Trimble Yuma2 tablet (No physical keyboard).?ÿ I only use SurvPC to run my Topcon GPS and Access fo...
@erwsdot?ÿ I prefer to have them all running the correct direction, but the local reviewers are sticklers for it.?ÿ I'm just frustrated that it has be...
@edward-reading Here's a Dropbox link to photos of both T-3's.
@kelnnev If his has sold, I have two that I would be willing to sell.
@marcus-md @just-a-surveyor This only happens when I need to label a portion of an arc.?ÿ For example, on a subdivision plat I'll have a lot where the...
Little bit of light CAD and some accounting to finish off my day.
As a rotten kid, I figured out that walnut hulls and ashes from the wood stove (mainly oak) make a pretty shade of pink when mixed with water.?ÿ It re...
My guess is that the availability of GPS on cellphones has severely cut into the market for stand alone handheld GPS receivers.
The legs alone go for $400 new.?ÿ A non-brand name traverse kit will go for close to $500.?ÿ You have two and they're Leica so I'd guess at least a co...
@moosesamuel?ÿ Someone here has posted a diagram before showing the science.?ÿ The gist is that with many common prism setups the center of the pole i...
I always keep the Velcro attached to itself even when the bipod is in use just to help keep it free of trash and mud.?ÿ
Do you have the other guys topo in CAD or only in paper or pdf??ÿ If you have it in CAD you can draw a line between the control points and query the l...
Are you using a data collector of some sort or does your S6 have a faceplate with data collection capability??ÿ Most S6's don't have the ability to mu...
The easy way to do this is to just set up and shoot the reference points and the utility info you're looking for.?ÿ Export the coordinates and then tr...
@jim-frame?ÿ I just looked out of curiosity, HP Designjet 500 is as low as the current list of Win10 Hp drivers goes.?ÿ Glad your solution is working.
