I think we established that you need an accurate instrument, rock solid setup and resection, free-station can be a useful way of getting and accurate ...
2nd hand Leica equipment isn't too bad pricewise.Maybe 12,500 euros for a full robotic setup.The 1200 "+" can also connect with CS15 and run Viva, so ...
But that's not a number you can use without converting. I mean you can't put that into the SIN formula for example.
oops didn;t noticed this was from years ago.It was even weirder seeing myself replying further down the page, that was a bit dejavu.
> I have to run out for a few minutes, but later I will post a link to functions I have created for Excel which allow you to convert both ways with...
There are conversion tools bundlled with StarNet, at least version 7 onwards.Check in the start menu folder under Microsurvey you may find "Convertors...
I think the email/SMS alerts might be generated on their "4D" software product.Yes I've been telling them to get going for a while now, they have youn...
That's interesting. Can it be set to check the backsight(s) on each round? I would have thought so.What are the options for alerts? My TSC3 has a SIM ...
Some makes of older instruments (eg Leica) had the optical plummet in the tribrach.Trimble 5600 (oldish instrument) had this as well.I think all manuf...
For monitoring vertical movement with total station you will want to be setting up either by free-station/resection or if setting-up over a point then...
Jim, I'm curious - what does the Monitoring module offer to the average project?I would normally just use stake points routine. (S6 and TSC3 running A...
How would one get access to DigiLev?Seems to be a ODOT private thing.
Doesn't seem to cope with Level files though.The levelpak software was included with it originally I think.I think LGO (Leica Geomatics Office) should...
at around 300' I would guess 0.03' to 0.06' for repeatable accuracy using a laser level.
Check the beam width when it's near dark. You'll think again about only 1/16" error at 100'. The beam is wider than that.
Always used a cheapo USB to serial adapator myself but it did always take a bit of messing around to get the settings right.I was getting corruption u...