Much faster processor and a significantly bigger and brighter screen than the CS15. of course there is a trade off with battery consumption.
Are you taping slope distance or horizontal distance? 😉
There is big difference between AutoCAD and Autodesk Civil 3D.I would recommend starting with the former. Big learning curve on civil 3D, especially i...
Peter Kozub, post: 427071, member: 375 wrote: MPR 122 Leica 360Don't get anything else all else is garbOne more timeMPR 1221 Tough2 good centering.3 ...
GRZ101 is a great prism but will not reliably work with "powersearch" on the Leica instruments that have it (most of the newer ones).
First thing to check is the coordinates. Measure the coordinates at the corners of the blade with your rover and then note them down from the machine ...
Richard, post: 426446, member: 833 wrote: I remember when Field Genius was being touted, and having an interesting conversation with the author before...
record points in pairs and edit in excel after.
MightyMoe, post: 425663, member: 700 wrote: We set the base onsite when needing decent elevations for tight verticals. The base sits on a benchmark, I...
base9geodesy, post: 425769, member: 7189 wrote: A soap-box of mine - unless you are working in Earth-Centered Earth-Fixed coordinates a bench mark wil...
I quickly configured the base and I didn't check Glonass was enabled. Maybe that it is it. I will have to check tomorrow.The location was not complete...
Jethro, post: 425222, member: 7322 wrote: I have a Leica XLM stylesheet for Civil 3D. It has to exported out of the CS20. Is this what you are looki...
If you move your tribrach when occupying you are not doing forced centring.I would rather be a couple of mm out on each point than mess up the tightne...
John Putnam, post: 425123, member: 1188 wrote: Squowe,The stakeout results, at least station and offset, are stored as annotations. Look under the an...
The two coordinate system files are correct. They need to go into the following folders on the Cf cardData/GPS/CSCS for the csc fileData/GPS/Geoid for...