leegreen, post: 426968, member: 2332 wrote: I hate seeing post's like this where the OP can't find the correct routine when it is right in front of th...
Todd Hunter, post: 425665, member: 11035 wrote: We recently purchased Topcon Hiper V with the FC-5000 and FC-500 using the Magnet software. We have f...
why not just be a good guy and put it off to the side- after you're long gone he is going to be stuck with it. If that was in my driveway here in Mai...
Kris Morgan, post: 424068, member: 29 wrote: That's great until your robot is on the other side and the robot can't see the prism, just the black back...
I'm just spitballing here but I'll bet that USB port only supports data transfer and it would be restricted from being a data i/o comm port. You may ...
Luke J. Crawford, post: 419206, member: 11382 wrote: Carlson SurvCE has all the drivers for the IX too. I believe they are the same as the SRX, SX &am...
As suggested above you could switch to a prism only pole and direct comm from the DC to the instrument. The field crew will need to drive the instrum...
I've installed and trained a number of customers on our Gyro systems. We automated the system a few years back and mounted the gyro on a robotic inst...
Peter Lothian - MA ME, post: 409663, member: 4512 wrote: I suspect that it may have more to do with the cell phone network, than the GRX itself. We'l...
foggyidea, post: 409642, member: 155 wrote: Peter, I had to send my Sokkia's in to MTS to get updated as I couldn't do it myself, even with the "speci...
Stan Dardparallel, post: 410170, member: 895 wrote: Are you happy with it? Any strange quirks or bugs I should know about? What software are you usi...
The weird noises Lee refers to is the sound of the ultra-sonic motor in tracking mode. Nothing wrong with it and imperceptible at working distance. ...
I'll check with Product Management.
Arturs, post: 413992, member: 11365 wrote: Don't really know about Topcon or Trimble unfortunately, i assume it should be something similar. Although ...
I used a DKM3AX at the Cape for azimuths for IMUs - a great instrument and fun to use for astro- took a while to get used to the broken scope and the...
