Yours looks great.?ÿ I did something similar with wood, L brackets, screws and tape.

There are many receivers available now that have an IMU that in theory does not require calibration.?ÿ ?ÿ?ÿ

Yes but the trimble terrasync will not recognise/configure or connect to the G1 receiver

Trimble Siteworks and Tilt Compensation - The Plumb Pole Routine

Ok, I'll bite. Why not loose both?

The ole pink boot, I hate that. I had a can fail the other day at home, carb cleaner that dissolved and stripped clean far more than intended.

Yes, like the X-pad android software.?ÿ Their gear is a little more expensive.

Check the specifications.?ÿ We run the G1-s that is dual frequency, and 220 channels, no tilt/ e-bubble.?ÿ The G1 Plus is triple and usually 336 chann...

There is a Stonex S900A with Altlas that appears to be the same receiver.?ÿ Claimed to be made in Italy, by a Chinese company? Specifications and pri...

We have South S82V now back up, and G1 basic base and rover with X11 controller, Survce 5. Very budget conscious company. We had an issue with S82V ba...

Android is based on Linux.?ÿ Many Chinese receivers use a Linux OS internally.?ÿ I have tested a couple of Android apps, X-pad (hexagon) and Surv-X.?ÿ...

In ancient times (c. 1985 small town New Zealand) I used a Kern Tachymeter, a optical theodolite with direct reading of distance off the staff,?ÿ Rath...

I use localize GNSS by points.?ÿ Can reprocess in SurvCE, in localisation delete existing localization point(s).?ÿ Use a new point with desired values...

If considering upgrade existing win 7 to win 10, recommend a new ssd as the primary drive and keep the existing drive unmolested as a secondary drive....

@richard-imrie Yes the newer South batteries are 3400mAh verse 2700mAh? for the old ones. BTNF-L7408W from Surveying TDX via Aliexpress. We paid NZ$...

In cheap power tools, or old gear yes. But I am cheap too. Recently bought two batteries for about $100, back up GNSS South S82-V, these are Trimble S...