That's pretty bad. As per a classic Australian film, "Tell him he's dreaming."
We try Ralph. Still got a lot to learn. 😀
We never assume an instrument is correct after it comes back from the shop. They are always calibrated, by us, before use.They also get run over the E...
Look For A Circle ErrorThanks Paul. I was thinking of doing something very similar to that. I'll use your suggestion.I should be getting Leica's docum...
4 sets by ATR, not by hand.
I like the parasol idea, but it's usually not suitable for parasols where I am. I try and cycle the robot from left face to right face regularly while...
As per my above post.Because I got a spidey sense from my first two traverses with the 1sec, I reran both instruments over a traverse at the same time...
It is. Both instruments were calibrated in the last month. Both turn left and right face about as tight as possible. ATR results check with optical re...
A bit more info. Because I got a spidey sense from my first two traverses with the 1sec, I reran both instruments over a traverse at the same time.5 s...
Tribrachs - recently.Depends on application.yes.yes.
It's definitely not an EDM issue. It's a Leica system end to end. The distances are fine and match between both instruments. One instrument is too new...
Localise on two marks and your residuals will be zero...... And you'll be very, very wrong. 🙂
Oh the humanity!!!
Unless they've done some serious magic to the drone, then you can't use lidar.It's a UAV with a handheld quality gps on top and a ricoh digicam undern...
What does it matter?????I don't think so. I think the main culprits for having focus on the side (the Trimble robots) have a "flybywire" focus mechani...
:good: Use the kids out of college. They may be lacking in experience but they often have new insights and more up to date education.A fresh pair of e...
Surveyor with laser scanning experience, sure.Surveyor with enough nouse to sit down and learn how laser scanning and the software works, sure.Random ...
We have a Forester 2005.Good car. We use it for some odd jobs, especially when there's heavy equipment as the low and large boot is far more accessibl...
What surface?
